background image

7

Warranty 

Hilti warrants that the tool supplied is free of defects in
material and workmanship. This warranty is valid so
long as the tool is operated and handled correctly, cleaned
and serviced properly and in accordance with the Hilti
Operating Instructions, all warranty claims are made
within 12 months from the date of the sale (invoice date),
and the technical system is maintained. This means that
only original Hilti consumables, components and spare
parts may be used in the tool. This warranty provides
the free-of-charge repair or replacement of defective
parts only. Parts requiring repair or replacement as a
result of normal wear and tear are not covered by this
warranty.

Under no circumstances will Hilti be obligated for
direct, indirect, incidental or consequential damages,
losses or expenses in connection with, or by reason
of, the use of, or inability to use the tool for any pur-
pose. Hilti specifically excludes the implied warranties
of merchantability and fitness for a particular purpose.
For repair or replacement, send tool and/or related parts
immediately upon discovery of the defect to the address
of the local Hilti marketing organization provided.
This constitutes Hilti’s entire obligation with regard to
warranty and supersedes all prior or contemporaneous
comments and oral or written agreements concerning
warranties.

Disposal

Batteries
Hilti batteries contain nickel and cadmium.
Dispose of batteries in accordance with national regulations.

Summary of Contents for te6-a















Reviews: