Hilti TE 505 breaker
Kit supplied with the machine:
Plastic case, cleaning cloth, Hilti insert tool
grease, operating instructions
Technical data
Power input:
900 W
Voltage (versions):
100 V, 110 V, 115 V, 230 V, 240 V
Current input:
9.6 A, 8.7 A, 8.5 A, 4.2 A, 4.2 A
Frequency:
50–60 Hz
Machine weight:
4.9 kg
Dimensions:
440
×
90
×
210 mm
Hammering speed under load:
1860/2630 blows/min.
Single impact energy:
2.6 joules / 5.2 joules
Chiselling performance in medium-hard concrete:
300 cm
3
/min. with standard SM36 chisel
360 cm
3
/min. with light-duty LSM 28 chisel
Chisels:
Pointed, narrow flat, wide flat, extra wide flat,
hollow, channel (narrow or wide) scoop, in stan-
dard versions and some of light-duty design
Chuck:
TE-Y
Chisel cutting edge adjustment to 12 positions
Permanent lubrication
Adjustable side handle
On/off switch of rocker design
Electronic r.p.m. regulation for improved operating convenience
Hammering power regulation: max. = 100%, min. = 50%
Double insulation, class II, CENELEC HD 400
This electric tool is radio and TV interference suppressed in compliance with the EC directives
76/889/EC + 82/449/EC
Radio and TV interference suppression as per EN 55 014
Service indicator with warning lamp
Noise and vibration
The sound power level of the machine is less than 108 dB (A)
Wear ear protection.
The typical weighted acceleration is 12 m/s
2
.
Right of technical modifications reserved.
The respective regulations of your trade association and the enclosed safety precautions must
be observed.
Do not use this product in any way other than as directed by these operating instructions.
EC declaration of conformity
Description:
Breaker
Serial no.:
XX/0000001 - 9999999/XX
Designation:
TE 505
Year of design:
1998
We declare, under our sole responsibility, that this
product complies with the following standards or stan-
dardization documents:
EN 50144, EN 55014, EN 60555 according to the pro-
visions of the directives 73/23/EEC, 89/336/EEC,
89/392/EEC
Hilti Aktiengesellschaft
Dr. Bruno Glaus
Dr. Heinrich Schäperkötter
Leiter Marketing Bohrmontage Leiter Entwicklung Bohrmontage
Development manager D&ET division
1/1998
1/1998
6
Always wear ear
protectors.
Always wear pro-
tective gloves.
Always wear safety
glasses.
1
2
3
4
5
6
7
➜
