12
en
2. Description
– Function selection switch for:
Hammer drilling, Drilling without hammering
Chiseling, Chisel adjustment (24 positions)
– Power selection: full power and reduced power
– Control switch lockable for chiseling
Grips
– Adjustable side handle with depth gauge
– Vibration-absorbing grip
Safety features
– Mechanical slip clutch
– Additional ATC "active torque control" system
(TE 56-ATC)
Lubrication
– Gearing and hammering mechanism with separate
lubrication chambers
Indicator lamps
– Power indicators "full power" and "reduced power (50%)"
(reduced power: orange)
– Service indicator (yellow)
– Anti-theft system indicator (available as option) (blinks
yellow)
The following items are supplied as standard
– Tool
– Toolbox
– Grease dispenser (50 ml)
– Cleaning cloth
– Operating instructions
3. Tools and accessories
Chucks
TE 46
TE-T
TE 56 / TE 56-ATC
TE-Y
Hammer drill bits
TE 46
6–32 mm dia.
TE 56 / TE 56-ATC
12–40 mm dia.
Breach bits
TE 46
40 mm dia.
TE 56 / TE 56-ATC
40–66 mm dia.
Percussion core bits
TE 46
50–90 mm dia
TE 56 / TE 56-ATC
45–90 mm dia.
Diamond core bits PCM
TE 46 / TE 56
–
TE 56-ATC
42–87 mm dia.
Chisels
Pointed, flat and shaped chisels
TE 46
with TE-T connection end
TE 56 / TE 56-ATC
with TE-Y connection end
Setting tools
TE 46
Setting tools with TE-T connection end
TE 56 / TE 56-ATC
Setting tools with TE-Y connection end
Quick-release chuck
Quick-release chuck 60208 for wood and metal drill
bits with cylindrical or hex. shank
TE 46
Chuck holder 264758
TE 56 / TE 56-ATC
Chuck holder 263359
Wood drill bits
10–32 mm dia.
Metal drill bits
Up to 20 mm dia.
Mixing non-inflammable substances
Mixing paddles with cylindrical
or hex. shanks of 80–150 mm dia.
Dust removal system
TE DRS-S 340602
Correct use
The tool is designed for drilling in concrete and mason-
ry. The tool may also be used for light to medium-duty
chiseling work.
The working environment may be on a construction site
or in a workshop and may consist of renovation, con-
version or new building work.
The tool is an electrically powered rotary hammer drill
and breaker with a pneumatic hammering mechanism.
The ATC function TE 56-ATC (active torque control) pro-
vides additional safety for the user when drilling. The tool
is intended for professional use.
The tool is equipped with electronic overload protection.
This reduces motor speed or, if necessary, stops the
motor when the tool is subjected to sustained overload.
The motor provides full power again as soon as the con-
trol switch is released and then pressed again. When
restarting, care should thus be taken to ensure that the
tool is held securely with both hands.
Chucks (TE 46)
– Quick-change chuck TE-T
Chucks (TE 56/TE 56-ATC)
– Quick-change chuck TE-Y (SDS max)
Switches
– Speed control switch for smooth hole starting
