Hilti TE15-C Rotary Hammer Drill
Technical data
Input power:
710 W
Voltage (versions):
120 V
Input current:
6.3 A
Frequency:
50–60 Hz
Speed under load:
0–730/min.
Hammering under load:
0–3850 blows/min.
Single impact energy:
2.2 Joules / 1.6 ft-lbs.
Drill bit size range:
4–28 mm dia. /
3
/
16
″
–1
1
/
8
″
dia.
Optimal performance dia.:
10–16 mm /
3
/
8
″
–
5
/
8
″
Drilling performance in medium-grade
concrete with 12 mm dia. drill:
42 cm
3
/min.
Ⳏ
370 mm/min. / 110 in
3
/min.
Chiselling performance in medium-hard
concrete with pointed chisel:
180 cm
3
/min.
Chuck type:
TE-C
Drill bit connection end:
TE-C
Automatic cut-out brushes
Protection Class I (grounded tool)
With slip clutch
Dust-tight enclosure, central and permanent lubrication (maintenance free)
Variable speed switch
Side handle adjustable with depth gauge
Forwards/reverse switch
Right of technical modifications reserved
3
Do not use this product in any way other than as directed by these operating instructions.
The respective regulations of your trade association and the enclosed safety precautions
must be observed.
The operating instructions should always be kept with the machine!
1
2
3
4
Always wear ear
protectors.
Always wear pro-
tective gloves.
Always wear safety
glasses.
R
This Product is UL listed
Protective earthing
Printed: 07.07.2013 | Doc-Nr: PUB / 5070794 / 000 / 00
