Hilti TE DRS6-A, Original Operating Instructions, Page: 18 / 246

12 English
▶
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may cause irritation or burns.
Service
▶
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
2.2 Additional safety instructions
▶
Observe all safety instructions in this documentation and in the documentation of the
Hilti rotary hammer drill.
▶
Use respiratory protection to keep residual dust away from the face and airways when
drilling and when servicing the tool or accessories.
▶
Always use the side handle on the Hilti rotary hammer drill, even when the dust
removal module is fitted.
2.3 Careful handling and use of batteries
▶
Observe the special guidelines applicable to the transport, storage and use of lithium-
ion batteries.
▶
Do not expose batteries to high temperatures, direct sunlight or fire.
▶
Do not take apart, squash or incinerate batteries and do not subject them to
temperatures over 80 °C.
▶
Do not attempt to charge or continue to use damaged batteries.
▶
If the battery is too hot to touch, it may be defective. In this case, place the power
tool in a non-flammable location, well away from flammable materials, where it can be
kept under observation and left to cool down. Contact Hilti Service after the battery
has cooled down.
3 Description
3.1 Product overview 1
@
Suction head
;
Stroke preset button
=
DRS electrical interface
%
DRS release button
&
Dust container release
(
Depth gauge
3.2 Intended use
The TE DRS­6­A dust removal module is an accessory for the Hilti TE 6­A36 rotary
hammer drill. It collects a high percentage of the dust and it attaches quickly and easily
to the rotary hammer drill. The dust removal module is equipped with a suction fan. This
fan is driven by its own motor. When the rotary hammer drill is switched on the dust
removal module draws its electric power from the rotary hammer drill’s battery.
The dust removal module is not suitable for working on metal and wood.
3.3 Items supplied
TE DRS-6-A dust removal module, operating instructions.
You can find other system products approved for your product at your local Hilti Center
or online at: www.hilti.com .
Printed: 21.10.2016 | Doc-Nr: PUB / 5071244 / 000 / 04