background image

English

1

1

Information about the documentation

1.1

About this documentation

• Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free

handling and use of the product.

• Observe the safety instructions and warnings in this documentation and on the product.

• Always keep the operating instructions with the product and make sure that the operating instructions

are with the product when it is given to other persons.

1.2

Explanation of symbols used

1.2.1 Warnings

Warnings alert persons to hazards that occur when handling or using the product. The following signal words

are used:

DANGER

DANGER

!

Draws attention to imminent danger that will lead to serious personal injury or fatality.

WARNING

WARNING

!

Draws attention to a potential threat of danger that can lead to serious injury or fatality.

CAUTION

CAUTION

!

Draws attention to a potentially dangerous situation that could lead to slight personal injury or damage

to the equipment or other property.

1.2.2 Symbols in the documentation

The following symbols are used in this document:

Read the operating instructions before use.

Instructions for use and other useful information

Dealing with recyclable materials

Do not dispose of electric equipment and batteries as household waste

1.2.3 Symbols in the illustrations

The following symbols are used in illustrations:

These numbers refer to the corresponding illustrations found at the beginning of these operating

instructions
The numbering reflects the sequence of operations shown in the illustrations and may deviate

from the steps described in the text
Item reference numbers are used in the

overview illustrations

and refer to the numbers used in

the

product overview section

This symbol is intended to draw special attention to certain points when handling the product.

1.3

Product information

products are designed for professional users and only trained, authorized personnel are

permitted to operate, service and maintain the products. This personnel must be specifically informed about

 Printed: 04.07.2019 | Doc-Nr: PUB / 5368075 / 000 / 03

Summary of Contents for TE 500-X





















Reviews: