Hilti TE104 Scaler
Kit supplied with the machine:
Plastic case, cleaning cloth, Hilti connection end grease, operating instructions
Technical data
Input power:
550 W
Voltage:
115 V
Input current:
4.8 A,
Frequency:
50–60 Hz
Machine weight:
3.5 kg (7.7 lbs)
Dimensions:
365
×
190
×
85 (14.4
″ ×
7.5
″ ×
3.3
″
)
Hammering under load:
0–3800 blows/min.
Single impact energy:
2.2 Joules
Front section designed to be held
Permanent lubrication
Variable speed control switch
Automatic cut-out brushes
Quick-release chuck for set of scaling needles
Quick-release chuck:
for TE-C chisels
Chisel blade adjustment to 8 positions
Chisels with extended TE-C connection end:
Pointed, narrow, flat, wide flat/scraper,
flexible, channel, mortar and joint chisels
Needle protector with round and oval opening for the sets of needles
Double insulation construction, class II
Right of technical modifications reserved
Please note before starting to work
Read the enclosed General Safety rules.
When working with the machine, it must be held with two hands. Always make sure that you have a safe
stance/foothold.
1. The electric supply must be the same as given on the TE 104 nameplate.
2. The TE 104 is double insulated and must
not be grounded.
Wear protective gloves, safety glasses and ear protectors.
Double insulation
Always wear ear
protectors.
Always wear
protective gloves.
Always wear safety
glasses.
Do not use this product in any way other than as directed by these operating
instructions.
The respective regulations of your trade association and the enclosed General
safety rules must be observed.
The operating instructions should always be kept with the machine!
This Product is
UL listed and CSA certified
R
Printed: 07.07.2013 | Doc-Nr: PUB / 5070789 / 000 / 00
