![background image](http://html1.mh-extra.com/html/hilti/sjt-6/sjt-6_original-operating-instructions_2136174010.webp)
4
English
2150300
*2150300*
2.3
Additional safety instructions
Personal safety
▶
Use the tool only when it is in technically faultless condition.
▶
Never tamper with or modify the tool in any way.
▶
Always hold the power tool with both hands on the grips provided. Keep the grips clean and dry.
▶
Suitable protective glasses, ear protection and protective gloves must be worn while the tool is in use.
▶
Wear protective gloves when changing the accessory tool. Touching the accessory tool presents a risk
of injury (cuts or burns).
▶
Wear eye protection. Flying fragments present a risk of injury to the body and eyes.
▶
Before beginning the work, check the hazard classification of the dust that will be produced. Use an
industrial vacuum cleaner with an officially approved protection classification in compliance with locally
applicable dust protection regulations.
▶
Make sure that the workplace is well ventilated and, where necessary, wear a respirator appropriate for
the type of dust generated. Contact with or inhalation of the dust may cause allergic reactions and/or
respiratory or other diseases to the operator or bystanders. Certain kinds of dust are classified as
carcinogenic such as oak and beech dust, especially in conjunction with additives for wood conditioning
(chromate, wood preservative). Material containing asbestos may be handled only by specialists.
▶
Take breaks between working and do physical exercises to improve the blood circulation in your fingers.
Exposure to vibration during long periods of work can lead to disorders of the blood vessels and nervous
system in the fingers, hands and wrists.
Electrical safety
▶
Before beginning work, check the working area for concealed electric cables or gas and water pipes.
External metal parts of the power tool may give you an electric shock if you damage an electric cable
accidentally.
Careful handling and use of electric tools
▶
Secure the workpiece. A workpiece clamped in a vice or secured by some other clamping device is more
secure than when held only by hand.
Special safety instructions for jig saws
▶
Always guide the product away from your body when working with it.
▶
Never position your hands ahead of or on the saw blade.
▶
Never cut into unknown materials and keep the line of cut above and below the workpiece free of
obstacles.
▶
Never reach or grip below the workpiece while cutting.
3
Description
3.1
Product overview
@
On/off switch
;
Grip
=
Stroke rate regulator thumbwheel
%
Air vents
&
Suction adapter
(
Catches
)
Base plate
+
Lever for orbital action
§
Anti-splinter insert
/
Saw blade
:
Contact guard
∙
Guard
$
Blade holder
£
Saw blade release lever
3.2
Intended use
The product described is a hand-held, electrically powered orbital-action jig saw. It is designed for cutting
plastic, wood and metal materials, drywall board and gypsum fiberboard.
Summary of Contents for SJT 6
