![background image](http://html1.mh-extra.com/html/hilti/siw-22t-a-1-2-inch/siw-22t-a-1-2-inch_original-operating-instructions_2136162012.webp)
6
English
2153646
*2153646*
5
Operation
5.1
Fitting the belt hook (optional)
7
WARNING
Risk of injury!
Hazard presented by a falling power tool.
▶
A falling power tool may present a risk of injury to yourself and others. Check that the belt hook is fitted
securely before beginning work.
The belt hook allows the power tool to be attached to a belt worn by the operator. The belt hook can
be fitted to allow attachment on the left or right side of the body.
1. Disconnect the battery from the tool.
2. Fit the mounting plate into the guides provided.
3. Use the 2 screws to attach the belt hook and make sure that the screws are driven fully (countersunk
head flush).
5.2
Setting forward or reverse rotation
6
In the middle position, the forward / reverse selector switch serves as a safety lock.
▶
Set the forward / reverse selector switch to forward or reverse rotation.
5.3
Fitting the socket
3
SIW 22T-A
1
/
2
"
CAUTION
Risk of injury
through use of the wrong type of accessory tool!
▶
Use only accessory tools of the locking type.
▶
Do not use worn or damaged accessory tools.
1. Set the forward/reverse switch to the middle position or remove the battery from the power tool.
2. Align the hole in the socket with the retention ball on the square drive.
3. Fit the locking ring on the socket.
◁
The socket engages securely.
5.4
Fitting the socket
4
SIW 22T-A
3
/
4
"
CAUTION
Risk of injury
through use of the wrong type of accessory tool!
▶
Use only accessory tools of the locking type.
▶
Do not use worn or damaged accessory tools.
1. Set the forward/reverse switch to the middle position or remove the battery from the power tool.
2. Remove the O-ring from the groove in the socket.
3. Place the socket on the square drive spindle of the tool.
4. Pull out the locking pin.
5. Place the socket on the square drive spindle of the tool.
Take care to ensure that the holes in the square drive spindle and socket, into which the locking
ring fits, are in alignment with each other.
6. Insert the locking pin in the socket.
7. Fit the O-ring on the socket.
Printed: 05.04.2018 | Doc-Nr: PUB / 5293240 / 000 / 01
Summary of Contents for SIW 22T-A 1/2 inch
