2
G
Follow the instructions concerning care and mainte-
nance.
4.4 State of the art
G
The appliance is designed and manufactured accord-
ing to the state of the art.
G
The appliance and its ancillary equipment may pre-
sent hazards when used incorrectly by untrained per-
sonnel or not as directed.
2. Description
The appliance is used for charging Hilti batteries with a nominal voltage of 7.2 to 18 volts.
3. Technical data
Mains voltage
110–127 V
Mains frequency
50/60 Hz
Output voltage
7.2–18.0 V
NiCd
NiMH
Current output within the voltage range
7.2–18.0 V
7.2–18.0 V
Charging current (± 0,2 A)
2 A
2 A
Trickle charge (± 10%)
100 mA
100 mA
Charging time
60 min.
90 min.
Weight
ca. 3.8 lbs
Supply cord length
approx. 6.6 ft
Dimensions (L
×
W
×
H)
9.2
×
5.3
×
3.0 in
Wall mount
Electronic (microcontroller) charging control
Battery cell temperature monitoring:
NiCd:
≤
12 V with diode
NiCd:
≥
15.6 V with NTC
NiMH:
≥
9.6 V with NTC
Protection class:
Electrical protection class II (double insulated)
Z
Right of technical changes reserved.
4. Safety precautions
4.1 Basic safety information
In addition to the safety precautions listed in the individual sections of these operating instructions, the following
points must be strictly observed at all times:
4.2 Correct use
The appliance is to be used to charge Hilti batteries with a nominal voltage of 7 to 18 volts. It can be used to charge
the following batteries:
SFB105
NiMH battery
For the SF100-A and SB10 cordless drill
SBP10
NiCd battery
drivers and the Hilti HIT-BD2000 dispenser
SFB125
NiMH battery
For the SF120-A and SB12 cordless
SBP12
NiCd battery
drill drivers
SFB121
NiCd battery
For the SF121-A cordless drill driver
SFB126
NiMH battery
SFB150
NiCd battery
For the SF150-A cordless drill driver
SFB155
NiMH battery
SFB180
NiCd battery
For the SF4000-A drywall drill driver and
SFB185
NiMH battery
SF180-A cordless drill driver
4.3 Incorrect use (misuse)
G
The appliance must not be used in areas where there
is a risk of explosion.
G
Use only Hilti batteries.
G
Manipulation or modification of the appliance is not
permissible.
Printed: 07.07.2013 | Doc-Nr: PUB / 5070686 / 000 / 00
