10 English
2235992
*2235992*
3
Care, transport and storage
3.1 Care and maintenance
WARNING
Risk of injury with battery inserted
!
▶
Always remove the battery before carrying out care and maintenance
tasks!
Care and maintenance of the tool
• Carefully remove stubborn dirt.
• Clean the air vents carefully with a dry brush.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning
agents containing silicone as these can attack the plastic parts.
Care of the Liion batteries
• Keep the battery free from oil and grease.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning
agents containing silicone as these may attack the plastic parts.
• Avoid ingress of moisture.
Maintenance
• Check all visible parts and controls for signs of damage at regular intervals
and make sure that they all function correctly.
• Do not operate the product if signs of damage are found or if parts
malfunction. Have it repaired immediately by
Hilti
Service.
• After cleaning and maintenance, fit all guards or protective devices and
check that they function correctly.
To help ensure safe and reliable operation, use only genuine Hilti spare
parts and consumables. Spare parts, consumables and accessories
approved by Hilti for use with the product can be found at your local
Hilti Store
or online at:
www.hilti.group
.
3.2 Storage and drying
▶
Do not put the product into storage when wet. Allow it to dry before
putting it away.
▶
Observe the temperature limits given in the Technical Data section which
are applicable to storage or transport of the equipment.
▶
Check the accuracy of the equipment before it is used after a long period
of storage or transportation.
3.3 Transport
The batteries must be insulated or removed from the product before it
is shipped or sent by mail.
Printed: 05.03.2019 | Doc-Nr: PUB / 5480839 / 000 / 00
