Hilti NURON TE 6-22, Manual

Page: 19 / 188

*2264937*
2264937 Dansk 13
Trouble or fault Possible cause Action to be taken
The battery runs down more
quickly than usual.
Battery condition is not optimal.
▶
Call up the battery’s state of
health. → page 6
The battery doesn’t engage
with an audible click.
The retaining lugs on the battery
are dirty.
▶
Clean the retaining lug and refit
the battery.
LEDs of the battery show
nothing
Battery defective
▶
Contact Hilti Service.
Product or battery gets very
hot.
Electrical fault
▶
Immediately switch off the
product. Remove the battery
and keep it under observation.
Allow it to cool down. Contact
Hilti service.
The insert tool can’t be re-
leased.
The chuck is not pulled back fully.
▶
Pull the chuck back as far as it
will go and remove the tool.
The tool makes no progress. Product has been set to reverse
rotation.
▶
Move the forward / reverse
switch to the “Forward” posi-
tion.
The function switch is set to
“Drilling without hammering” .
▶
Set the function switch to
“Hammer drilling” .
11 Disposal
WARNING
Risk of injury due to incorrect disposal! Health hazards due to escaping gases or liquids.
▶
DO NOT send batteries through the mail!
▶
Cover the terminals with a non-conductive material (such as electrical tape) to prevent short circuiting.
▶
Dispose of your battery out of the reach of children.
▶
Dispose of the battery at your Hilti Store , or consult your local governmental garbage disposal or public
health and safety resources for disposal instructions.
Most of the materials from which Hilti products are manufactured can be recycled. The materials must be
correctly separated before they can be recycled. In many countries, your old tools, machines or appliances
can be returned to Hilti for recycling. Ask Hilti Service or your Hilti sales representative for further information.
▶
Do not dispose of power tools, electronic equipment or batteries as household waste!
12 Manufacturer’s warranty
▶
Please contact your local Hilti representative if you have questions about the warranty conditions.
13 Further information
For more information on operation, technology, environment and recycling, follow this link:
qr.hilti.com/manual?id=2264935&id=2264937
This link is also to be found at the end of the documentation, in the form of a QR code.
Original brugsanvisning
1 Oplysninger vedrørende dokumentationen
1.1 Vedrørende denne dokumentation
• Læs denne dokumentation igennem før ibrugtagning. Det er en forudsætning for sikkert arbejde og
korrekt håndtering.
• Følg sikkerheds- og advarselshenvisningerne i denne dokumentation og på produktet.