Hilti NURON SJT 6-22, Original Operating Instructions

Page: 28 / 216

22 English 2264217
*2264217*
SJT 6-22
Maximum cutting performance in wood 150 mm
Maximum cutting performance in aluminum 25 mm
Maximum cutting performance in unalloyed steel
10 mm
Cutting angle (left/right) 0° … 45°
Suction adapter outside diameter 27.5 mm
Storage temperature −20 ℃ … 70 ℃
Ambient temperature for operation −17 ℃ … 60 ℃
4.2 Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the total
working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise emission values
SJT 6-22
Sound power level (L
WA
) 99 dB(A)
Uncertainty for the sound power level (K
WA
) 5 dB(A)
Sound pressure level (L
pA
) 88 dB(A)
Uncertainty for the sound pressure level (K
pA
) 5 dB(A)
Total vibration
SJT 6-22
Vibration emission value for sawing chipboard (a
h,B
) B 22­55 5.2 m/s²
B 22­255 5.3 m/s²
Vibration emission value for sawing sheet metal (a
h,M
) B 22­55 8.5 m/s²
B 22­255 7.2 m/s²
Uncertainty (K) 1.5 m/s²
4.3 Battery
Battery operating voltage 21.6 V
Weight, battery See the end of these
operating instructions
Ambient temperature for operation −17 ℃ … 60 ℃
Storage temperature −20 ℃ … 40 ℃
Battery charging starting temperature −10 ℃ … 45 ℃
5 Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
▶
Before inserting the battery, make sure that the product is switched off.
▶
Remove the battery before making any adjustments to the power tool or before changing accessories.