![background image](http://html1.mh-extra.com/html/hilti/ncr-120-22/ncr-120-22_original-operating-instructions_2135074017.webp)
*2321722*
2321722
Français
13
9.2
Crimping tool is not in working order
Trouble or fault
Possible cause
Action to be taken
Red LED => lights continu-
ously and a warning tone is
emitted.
Technical problem.
▶
Contact Hilti Service.
Red LED => flashes at short
intervals and a warning tone
is emitted.
The state of charge of the battery
is too low to allow a complete op-
erating cycle.
▶
Change the battery and charge
the empty battery.
Red LED => lights briefly and
no warning tone is emitted.
Product overheated.
▶
Allow the product to cool down.
10
Disposal
WARNING
Risk of injury due to incorrect disposal!
Health hazards due to escaping gases or liquids.
▶
DO NOT send batteries through the mail!
▶
Cover the terminals with a non-conductive material (such as electrical tape) to prevent short circuiting.
▶
Dispose of your battery out of the reach of children.
▶
Dispose of the battery at your
Hilti Store
, or consult your local governmental garbage disposal or public
health and safety resources for disposal instructions.
Most of the materials from which
Hilti
products are manufactured can be recycled. The materials must be
correctly separated before they can be recycled. In many countries, your old tools, machines or appliances
can be returned to
Hilti
for recycling. Ask
Hilti
Service or your Hilti sales representative for further information.
▶
Do not dispose of power tools, electronic equipment or batteries as household waste!
11
FCC statement (applicable in US) / IC statement (applicable in Canada)
This device complies with Part 15 of the FCC Rules and RSS-210 of lC. Operation is subject to the following
two conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired
operation.
12
Manufacturer’s warranty
▶
Please contact your local
Hilti
representative if you have questions about the warranty conditions.
13
Further information
For more information on operation, technology, environment and recycling, follow this link:
qr.hilti.com/manual?id=2321722
This link is also to be found at the end of the documentation, in the form of a QR code.
Mode d'emploi original
1
Indications relatives à la documentation
1.1
À propos de cette documentation
• Lire intégralement la présente documentation avant la mise en service. C'est la condition préalablement
requise pour assurer la sécurité du travail et un maniement sans perturbations.
• Bien respecter les consignes de sécurité et les avertissements de la présente documentation ainsi que
celles figurant sur le produit.
Summary of Contents for NCR 120-22
