Hilti DSW 2005-TS, Manual

Page: 21 / 44

*2235115*
2235115 English 17
5.4 Horizontal cut with 2 single-pulley stands
• Pass the diamond sawing wire at the start of the cut over the pulley stands and
through the object to be cut.
5.5 Flush cutting
• Install the wire spreader at the bottom position on the base plate so that the movable
guide pulley is in contact with the surface to be flush-cut.
• The guide pulleys at wire outfeed and infeed must be free to move so that they can
follow the changing angle of engagement.