36
English
2238935
*2238935*
1. Disengage the lock securing the transport handle.
2. Swing the transport handle into a horizontal position.
▶
The teeth of the lock are securely intermeshed.
3. Tighten the lock of the transport handle.
4. Insert the lifting bar into the socket at the swivel mechanism.
5. Release the catch and use the bar to pivot the wheel down into position.
▶
The catch is re-engaged.
6. Repeat these steps on the opposite side.
▶
The drive unit is now ready for transport.
Where access is awkward, the drive unit can also be maneuvered into position
by two persons.
7. Hold the drive unit by the transport handles provided for the purpose.
11
Troubleshooting table
Trouble or fault
Possible cause
Action to be taken
The wire saw doesn’t
start.
Edges of the structure are
too sharp.
▶
Use a suitable tool to
round off the edges of the
structure and manually
bed the sawing wire into
the material to be cut.
Summary of Contents for DSW 1510-CA
