Do not use extension cords with 16 AWG conductor cross section.
2.10 Using extension cords outdoors
When working outdoors, use only extension cords that are approved and correspondingly marked for this application.
2.11 Using a generator or transformer
This power tool may be powered by a generator or transformer when the following conditions are fulfilled: The unit
must provide a power output in watts of at least twice the value printed on the type identification plate on the power
tool. The operating voltage must remain 5% and -15% of the rated voltage at all times, frequency must be in
the 50 – 60 Hz range and never above 65 Hz, and the unit must be equipped with automatic voltage regulation and
starting boost.
Never operate other power tools or appliances from the generator or transformer at the same time. Switching other
power tools or appliances on and off may cause undervoltage and / or overvoltage peaks, resulting in damage to the
power tool.
2.12 Guard with side cover
2
CAUTION
When grinding with straight grinding discs and cutting with cutting discs in metalworking applications, use
only the guard with cover plate.
This is available as an optional accessory.
3 Insert tools, accessories
125 mm / 5" diameter discs for max. 11000/min and a max. peripheral speed of 80 m/sec
Designation
Item number, description
Abrasive cutting disc
AC-D Universal Premium
Abrasive cutting disc
AC-D Universal Super Premium
Abrasive cutting disc
AC-D INOX
Abrasive grinding disc
AG-D Universal Premium
Abrasive grinding disc
AG-D Universal Super Premium
Abrasive grinding disc
AF-D abrasive flap disc
Diamond cutting discs
DC‑D 125/5"
Diamond grinding disc
DG‑CW 125/5"
150 mm / 6" diameter discs for max. 9300/min and a max. peripheral speed of 80 m/sec
Designation
Item number, description
Abrasive cutting disc
AC-D Universal Super Premium
Abrasive grinding disc
AG-D Universal Super Premium
Diamond cutting discs
DC-D 150/6"
Items not supplied by Hilti
Designation
Wire brushes
Rubber backing pads
Accessories for the DEG 500 and DEG 600
Designation
Guard with side cover
Vacuum cleaner recommended by Hilti
Toolbox
en
4
DEG 500-D / DEG 600-D / DEG 600-P, Art. Nr.285964/A2, 05.03.2013
Printed: 07.07.2013 | Doc-Nr: PUB / 5138161 / 000 / 00