Hilti BX 3-BT, Original Operating Instructions

Page: 11 / 56

*2209577*
2209577 English 7
Status Meaning
The LED shows red. Malfunction; see “Troubleshooting”
The LED flashes yellow. Bring the fastening tool to Hilti Service.
3.5 Indication of battery charge status
When one of the battery release buttons is pressed, the display indicates the battery’s state of charge.
Reliable indication of the charge status is not possible while a fastener is being driven or immediately
after a fastener is driven.
Status Meaning
All four LEDs show green. Charge status is 75 % to 100 %.
Three LEDs show green. Charge status is 50 % to 75 %.
Two LEDs show green. Charge status is 25 % to 50 %.
One LED shows green. Charge status is 10 % to 25 %.
One LED flashes green. Charge status is below 10 %.
3.6 Items supplied
BX 3-BT fastening tool, X­FG B3 series fastener guide, operating instructions.
You can find other system products approved for your product at your local Hilti Center or online at:
www.hilti.com
4 Technical data
4.1 Fastening tool
Weight including battery B 22/2.6 Li-Ion (02) 4.0 kg
(8.8 lb)
B 22/3.0 Li-Ion (01) 4.1 kg
(9.0 lb)
B 22/4.0 Li-Ion 4.2 kg
(9.3 lb)
B 22/5.2 Li-Ion (01) 4.3 kg
(9.5 lb)
B 22/8.0 Li-Ion 4.6 kg
(10.1 lb)
Threaded-stud length 31 mm
(1.2 in)
Thread diameter 8 mm … 10 mm
(0.3 in … 0.4 in)
Compression stroke 12 mm
(0.5 in)
Contact pressure 50 N … 70 N
(11 lb
f
… 16 lb
f
)
Application temperature (ambient temperature) −15 ℃ … 50 ℃
(5 ℉ … 122 ℉)
Application temperature, threaded studs −10 ℃ … 50 ℃
(14 ℉ … 122 ℉)
Recommended maximum driving rate 650/h
Rated voltage 21.6 V
Printed: 20.09.2019 | Doc-Nr: PUB / 5514235 / 000 / 00