Hilti AG 100-7 (S/D), Original Operating Instructions

Page: 32 / 384

26
Trouble or fault Possible cause Action to be taken
The power tool doesn’t start. The supply cord or plug is defec-
tive.
▶
Have the supply cord and plug
checked by a trained electrical
specialist and replaced if
necessary.
The carbon brushes are worn.
▶
Have the power tool checked by
a trained electrical specialist and
the carbon brushes replaced if
necessary.
The tool doesn’t work. The tool has been overloaded.
▶
Release the on/off switch and
then press it again. Then allow
the power tool to run under no
load for approx. 30 seconds.
The tool does not achieve full
power.
The extension cord conductor
cross section (gauge) is inade-
quate.
▶
Use an extension cord with
an adequate conductor cross
section.
11 Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
In accordance with the European Directive on waste electrical and electronic equipment and its implemen-
tation in conformance with national law, electric tools or appliances that have reached the end of their life
must be collected separately and returned to an environmentally compatible recycling facility.
▶
Disposal of electric tools or appliances together with household waste is not permissible.
12 Manufacturer’s warranty
▶
Please contact your local Hilti representative if you have questions about the warranty conditions.
13 EC declaration of conformity
Manufacturer
Hilti Aktiengesellschaft
Feldkircherstrasse 100
9494 Schaan
Liechtenstein
We declare, on our sole responsibility, that this product complies with the following directives and standards.
Designation
Angle grinder
Type designation AG 100-7 (S/D)
Generation 03
Year of design 2013
Type designation AG 100-8 (S/D)
Generation 03
Year of design 2013
Type designation AG 115-7 (S/D)
Generation 03
Year of design 2013
Type designation AG 115-8 (S/D)
Printed: 16.10.2015 | Doc-Nr: PUB / 5169251 / 000 / 04