LED
50/58
NXIO 100-RE Board | Configuration and Hardware Description
DOC061101UM02EN | Revision 2 | English | 2011-06 | Released | Public
Hilscher, 2006-2011
LED State Definition for Powerlink Controlled Node/Slave for the
BS/BE LEDs
Indicator
state
Definition
On
The indicator is constantly on.
Off
The indicator is constantly off.
Blinking
The indicator turns on and off with a frequency of approximately
2,5 Hz: on for approximately 200 ms, followed by off for 200 ms. Red
and green LEDs shall be on alternately.
Flickering
The indicator turns on and off with a frequency of approximately
10 Hz: on for approximately 50 ms, followed by off for 50 ms. Red and
green LEDs shall be on alternately.
Single Flash
The indicator shows one short flash (approximately 200 ms) followed
by a long off phase (approximately 1,000 ms).
Double Flash
The indicator shows a sequence of two short flashes (each
approximately 200 ms), separated by a short off phase (approximately
200 ms). The sequence is finished by a long off phase (approximately
1,000 ms).
Triple Flash
The indicator shows a sequence of three short flashes (each
approximately 200 ms), separated by a short off phase (approximately
200 ms). The sequence is finished by a long off phase (approximately
1,000 ms).
Table 38: LED State Definition for Powerlink Controlled Node/Slave for the BS/BE LEDs
