Accessories
35/60
NXHX 51-ETM | Development Board
DOC120606HW05EN | Revision 5 | English | 2013-10 | Released | Public
© Hilscher, 2012 - 2013
4.1.5
Parallel Dual-Port Memory at Host Interface
The NXHX 51-ETM can be accessed from the PC via the NXPCA-PCI Card
(order number: 7902.100), using the host interface as parallel dual-port
memory.
Figure 9: NXHX 51-ETM Connected to NXPCA-PCI Board
For the setting of the X10 jumper on the NXHX 51-ETM required for
operating the NXPCA-PCI at the host interface see
for Dual-Port Memory at Host Interface X3
on page 14.
For further information on the NXPCA-PCI board, please refer to the
User
Manual NXPCA-PCI
.
4.1.6
Using NXHX 6-RE or NXHX 52-RE as Extension Bus at Host
Interface
Figure 10: NXHX 51-ETM Connected to NXHX 6-RE Board
For the setting of the X10 jumper on the NXHX 51-ETM required for
operating the NXPHX 6-RE or the NXHX 52-RE at the host interface see
Table 14: X10 - Setting for Extension Bus at Host Interface X3
