hilscher netPI NOIT-E-NPI3-51-EN-RE, User Manual

Page: 9 / 64

Connectors and mounting 9/64
4 Connectors and mounting
4.1 Mounting
Mount the Edge Gateway on a DIN rail onto the wall of the cabinet.
4.2 Power supply
DC 24V Pin Signal Description
- GND Ground (Reference potential)
+ +24 V DC +24 V DC
FE Functional earth
Table 4: Power supply connector
4.3 LAN connectors
The Edge Gateway has one LAN connector for connecting it to the cloud
network (IT network), position
(8) (see section Positions of the
interfaces [
}
page 6]).
The MAC addresses of the LAN interfaces are printed on the device label.
Section Configuring Ethernet communication (LAN) [
}
page 35] describes,
how you can set the IP address parameters of the LAN interfaces.
4.4 Real-Time Ethernet connectors
The Edge Gateway has 2 RJ45-connectors to connect the fieldbus to a
Real-Time Ethernet network (OT network), positions
(9) and (10) (see
section Positions of the interfaces [
}
page 6]).
4.5 USB connectors
The Edge Gateway has 4 USB connectors (4 x USB 2.0), positions (2) and
(7) (see section Positions of the interfaces [
}
page 6]).
You can connect for example a USB stick, an external hard drive or a
keyboard and use it together with a Docker image.
netPI | NOIT-E-NPI3-51-EN-RE
DOC170801UM01EN | Revision 1 | English | 2017-09 | Released | Public © Hilscher 2017