sensorEDGE Portal
136/166
Element
Description
Save
Click this button to save the chart configuration.
Click this button to replace the default data source label (“Sensor 0“)
with individual name/label.
Device
In this field, select the sensorEDGE device that shall be the source
device of the gauge. The fields offers all sensorEDGE devices that
are “paired” (“onboarded”) with your account and that are online.
Gauge Dial
In the drop-down list, select the sensor data source that you want to
visualize in your gauge. The list contains all data sources coming from
the IO-Link sensors that are connected to the selected sensorEDGE
device and that are in state “normal operation”. The list also indicates
the sensorEDGE device’s ports from where the sensor signal is
coming
Delete Sensor
Click this button to remove this data source from the chart.
Table 33: Elements in Data Source panel
Visualization panel
Figure 119: Gauge Chart Visualization panel
netFIELD sensorEDGE | User manual
DOC200601UM01EN | Revision 1 | English | 2021-09 | Released | Public
© Hilscher 2021
