Annex
259/299
PC Cards cifX Compact PCI, Mini PCI, Mini PCIe, PCI-104 | Installation, Operation and Hardware Description
DOC120205UM53EN | Revision 53 | English | 2019-03 | Released | Public
© Hilscher, 2008-2019
11.2 Tolerances of the shown Card Dimensions
The manufacturing tolerance of the printed circuit boards of the PC card
cifX is ± 0.1 mm per milled PCB edge. For all dimensions of the PCB
indicated on the drawings (in the sections
Dimensioning PC Cards cifX Mini PCI and
from page 264,
Dimensioning PC Cards cifX PCI-104
from page 265 and
Dimensioning detached Network Interfaces
272) thus results for the length L and the width W, a tolerance of ± 0.1 mm
(per milled edge) x 2 = ± 0.2 mm.
W = [
width of the board in mm
] ± 0.2 mm
L = [
length of the board in mm
] ± 0.2 mm
The depth T of the PCB depends on the highest part used or the circuit
board plus the descenders. The thickness of the PCB is = 1.6 mm ± 10%.
Note:
The dimensions (L x W x D) specified in section
on page 172 (and also the identical values in the data sheet
cifX and on the ‘Hilscher Site’) are rounded and unified for the respective
types of card. The depth of the PC cards
Compact PCI (CIFX 80)
has been
equated to the rounded width of the front panel.
