Technical data
33/55
Category
Parameter
Value
Device
Dimensions (L x W x H)
30 x 22 x 7,0 mm
Component heights
The component height on the upper side of the PC card
CIFX M223090AE is higher than the standard height of 1.5
mm, because the height of the cable connectors (Ethernet
X801 or fieldbus X802) including the cable is approx. 8.5
mm above the printed circuit board.
The component height on the bottom side of the PC card
CIFX M223090AE complies with the standard
specifications.
Host system
Note:
The PC card CIFX M223090AE Real-Time Ethernet
is equipped with an ASIX Ax99100, which prevents the
card from running on host systems with IOBAR
functionality via PCIe host controllers, as the driver cannot
access the SPI registers. Use a host system with IOBAR
functionality that does not run through the PCIe host
controller.
Mounting/installation
PCI Express slot (3.3 V), for M.2 type 2230-D3,
Dual Key A-E (Socket 1 Connectivity)
CE sign
CE sign
Yes
Emission
DIN EN 61000-6-3:2011-09 + Cor. 1:2012-11,
EN 61000-6-3:2007 + A1:2011
Immunity
DIN EN 61000-6-2:2006-03 + Cor. 1:2011-06
EN 61000-6-2:2005
Documentation to prove the
restriction of hazardous
substances
EN 50581:2012
RoHS
Yes
Firmware download
Software to download and update
the firmware
Device Explorer
Configuration
Configuration software
Communication Studio
Table 28: Technical data PC card CIFX M223090AE-RE\F
7.2
PCI identifiers on the PCI Express M.2 bus
The PC card CIFX M223090AE-RE\F is on the PCI Express M.2 bus a
multifunction device and requires two PCI identifiers. The following
identifiers are valid:
PCI identifier
Value
Vendor ID
0x15CF
Device ID.
0x0090
Subsystem vendor ID
0x15CF
Subsystem device ID
0x6001 (Flash-based device,
SPM)
0x1002 (interrupt source, SPM)
Table 29: PCI identifiers on the PCI Express M.2 bus
CIFX M223090AE Real-Time Ethernet | Hardware description and installation
DOC190704UM02EN | Revision 2 | English | 2020-06 | Released | Public
© Hilscher 2020
