hilscher CIFX M223090AE-RE/F, User Manual

Page: 20 / 63

Installing the hardware 20/63
Figure 4: Connecting cable to the detached network interface Ethernet (AIFX-V2-RE)
Ø
Then plug the cable into the cable connector Ethernet X801 on the
basic card.
Figure 5: Connecting cable to basic card, example CIFX M223090AE
Ø
Close the housing of the PC or connection device again.
4.5 Loading firmware and configuration in the device or making
an update
Ø Download the firmware from the Hilscher website and save the firmware
on the local hard disk of your PC.
Ø
If necessary, transfer the configuration to the PC. You create the
configuration using a suitable configuration software.
Ø
Use Device Explorer to load the firmware and configuration into the
device or update the firmware and configuration in your device.
Ø When downloading the firmware and configuration to your device or
when performing an update, follow the instructions in the "Device
Explorer" operating instruction manual.
For the "Device Explorer" operating instruction manual, see section
References [
}
page 49].
CIFX M223090AE-RE\F | Hardware description and installation
DOC190704UM06EN | Revision 6 | English | 2022-02 | Released | Public © Hilscher 2019 - 2022