Appendix
49/63
9
Appendix
9.1
FCC compliance
Federal Communications Commission (FCC)
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own
expense.
9.2
References
PCI Express M.2 specification
PCI-SIG (Special Interest Group), PCI Express M.2 Specification, Revision
1.1, English, 2016-12
Protocol API Manuals
Hilscher Gesellschaft für Systemautomation mbH: Protocol API, EtherCAT
Slave V5.3.0, Revision 3, DOC181005API03EN, English, 2021-08.
Hilscher Gesellschaft für Systemautomation mbH: Protocol API, EtherNetIP
Adapter V3.7.0 / V5.3.0, Revision 8, DOC150401API08EN, English,
2021-07.
Hilscher Gesellschaft für Systemautomation mbH: Protocol API, Open
Modbus/TCP V3.1.0 / V5.1.0, Revision 4, DOC180702API04EN, English,
2020-06.
Hilscher Gesellschaft für Systemautomation mbH: Protocol API,
PROFINET IO-Device V5.3.0, Revision 3, DOC190103API03EN, English,
2020-04.
Data sheet on the RJ45 femal connector
Erni electronics GmbH: Drawing, MOD JACK – MJIM, 8C8T, 1X2, INT.
MAG., LED, Drawing Nr. 203311, Revision a, Schema Nr. M3D01, English,
2004-10 (
https://www.erni-x-press.com/de/downloads/
CIFX M223090AE-RE\F | Hardware description and installation
DOC190704UM06EN | Revision 6 | English | 2022-02 | Released | Public
© Hilscher 2019 - 2022