hilscher 7763.200, Manual

Page: 31 / 72

Descriptions and drawings 31/72
2.4.9 2*RJ45 RT­Ethernet (X50)
Ethernet Pin Signal Description
1 TX+ Transmit data positive
2 TX– Transmit data negative
3 RX+ Receive data positive
4 Term 1 Connected and terminated to PE via RC
combination*
5 Term 1
6 RX– Receive data negative
7 Term 2 Connected and terminated to PE via RC
combination*
8 Term 2
* Bob Smith Termination
Table 31: Ethernet RJ45 pin assignment
PE is to be contacted directly at the metal casing!
Position (16) in section Printed circuit board [
}
page 11].
2.4.10 Power 24 V (X100)
The NXHX51­ETM development board has to be supplied with DC. VIN is
from 18 V to 30 V.
The typical supply voltage is 24 V. Power consumption is approx. 2.6 W.
Socket Number Description
(1) 24 V ± 6 V DC
(2) GND Ground
Table 32: Pin assignment power supply socket
Position (15) in section Printed circuit board [
}
page 11].
NXHX 51­ETM | Development Board
DOC120606HW06EN | Revision 6 | English | 2015­01 | Released | Public © Hilscher 2012 – 2015