Network Bullet Camera
·
Quick Start Guide
6
●
If smoke, odor or noise rise from the device, turn off the power
at once and unplug the power cable, and then please contact
the service center.
For NVR Device:
●
Proper configuration of all passwords and other security
settings is the responsibility of the installer and/or end-user.
●
In the use of the product, you must be in strict compliance with
the electrical safety regulations of the nation and region. Please
refer to technical specifications for detailed information.
●
Input voltage should meet both the SELV (Safety Extra Low
Voltage) and the Limited Power Source with 100~240 VAC, 48
VDC or 12 VDC according to the IEC60950-1 standard. Please
refer to technical specifications for detailed information.
●
Do not connect several devices to one power adapter as
adapter overload may cause over-heating or a fire hazard.
●
Please make sure that the plug is firmly connected to the power
socket.
●
If smoke, odor or noise rise from the device, turn off the power
at once and unplug the power cable, and then please contact
the service center.
●
If the POE ports of device do not comply with Limited Power
Source, the additional equipment connected to POE ports shall
have fire enclosure.
●
The USB interface of the /P devices can be connected with the
mouse and U-flash disk storage device only.
