4.1
Electrical Installation
•
Put the machine in safe conditions.
•
Turn the handlebar forward in hori-
zontal position.
•
Separate the lower casing of the
handlebar from the upper casing by
unscrewing the lower screws.
•
Disconnect
the
connecting
cable
from the control card and release the
cable from the fastening clamp.
•
Remove the screws that secure the
Handlebar Control Card
to the up-
per casing and remove the card.
•
Remove the lifting handle from the
handlebar stem by unscrewing the
screws
(see fig.
.
•
Release the lock levers of the tanks,
and remove them
(see fig.
.
4.1.0-1
4.1.0-2
•
Lay the machine on its side, and
loosen the lower screws of the
Up-
per Carter
, near the wheels and the
On/Off button.
•
Reposition the machine and remove
the upper screws from the front part
of the Upper Carter.
20
