14
Operations
Controls
1.
Brush/Vac Shoe Lift Lever
- Raises and lowers
both brush and vac shoe.
2.
Electrical Cord
3.
Main Power Switch
- Turns On and Off the vac
motor/pump and machine.
4.
Brush/Solenoid Knob
- Enables the brush motor
and solution spray (only when propelling).
5.
Speed Control Knob
- Adjusts the forward drive
speed of the machine. (See Below)
6.
Drive Motor Circuit Breaker
- 6 amp, protects the
drive motor mechanism.
7.
Vac Motor Circuit Breaker
- 11 amp, protect
vacuum motor.
8.
Brush Motor Circuit Breaker
- 8 amp, protect
brush motor.
9.
Solution Accessory Tool Hook-Up
- Used for
various auxiliary cleaning tools.
10. Main Handle
11.
Vacuum Accessory Tool Hook-Up
- To use
accessory tool, remove hose from vac shoe and
attach to accessory tool adaptor. 8.608-908.0
12. Vac Shoe Assembly
Drive Controls
A. The speed the machine will travel is regulated by
the knob located on the center of control panel.
Turn the knob to the right to increase the speed
of the machine and to the left to decrease the
speed of the machine.
B. Squeezing the control lever will propel the
machine forward at the selected speed. Machine
will also engage the brush and spray if #4 is acti-
vated.
C. To move the machine backwards release the
control lever and then pull back on main handle
NOTE: The machine drive assembly is disengaged.
Do not pull back on the control lever
HIL56087 - Operators Manual - Trident EX20
