3.2.
Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not
exceed 90%. Place the unit in a way that ensures good air circulation. Maintain a
minimum clearance of 10 cm from any wall of the unit. Keep the unit away from any
hot surfaces. Always operate the unit on a stable, fireproof surface and out of the
reach of children and persons of impaired mental, sensory and intellectual
functions. Place the unit in such a way that the mains plug can be reached at any
time. Ensure that the power supply to the unit corresponds to that specified on the
identification plate!
ASSEMBLY OF THE UNIT
Install the device on an open aquarium - in order to adjust it to the given aquarium
size, extend or slide the device's legs (see the two pictures below) so that the
product, resting on the edges of the aquarium side walls, is well-fitted to them at
the same time.
ATTENTION: The extendable legs are not equipped with stops; therefore, for safety
reasons, they must be extended and adjusted before mounting the product on an
aquarium! They can be connected to the power supply only after installation and
adjustment of the product.
