Installation
Remove the cap that’s covering the locking mechanism, this is located on the
bottom of the VoiceNav. With the cap removed you now have access to the
locking mechanism that secures your VoiceNav to its mounting plate. Insert a
small flat head screwdriver until it is located under the locking tongue.
Whilst turning either clockwise or counter clock wise, slide the VoiceNav
down
and clear of the locking tongue, you can now remove the VoiceNav from its
mounting bracket. Use the fixings supplied to secure the mounting plate to the
wall. The top of the Voicenav will be 9mm above the top of mounting bracket after
it is locked back in place.
9mm
Rear view showing cable header pins
2
Summary of Contents for VoiceNav
Page 1: ......
