7
Operation
After Use
• When you have finished, release pressure
from the bottle by slowly pulling up the
safety valve and holding until all air has
been released.
Do not release pressure
by unscrewing the container cap.
• After you have ensured the sprayer contains
no pressure, unscrew the container cap and
carefully dispose of any liquid left inside the
bottle. To clean your sprayer, rinse the bottle,
then fill the bottle with clean water to the
2L level, pressurise your sprayer and allow
it to empty.
Storage
• Make sure that the sprayer is not pressurised
and contains no liquid. Do not store in
direct sunlight and store out of reach of
children. Refer to detailed safety instructions
on page 3 and 4.
HLS0070_GardenSprayer_Produc_Manual_v5.indd 7
20/06/13 12:47 PM
