7
Operation
After Use
• When you have finished, release pressure
from the bottle by slowly pulling up the
safety valve and holding until all air has
been released.
Do not release pressure by
unscrewing the container cap.
• After you have ensured the sprayer contains
no pressure, unscrew the container cap and
carefully dispose of any liquid left inside the
bottle. To clean your sprayer, rinse the bottle,
then fill the bottle with clean water to the 2L
level, pressurise your sprayer and allow it to
empty.
Storage
• Make sure that the sprayer is not pressurised
and contains no liquid. Do not store in direct
sunlight and store out of reach of children.
Refer to detailed safety instructions on page
3 and 4.
455644_HH2358_4L_5L_7L_8L_Pressure_Manualv2.indd 7
29/10/2015 3:44 pm
