17
Operation
Fig. 15
Fig. 14
Fig. 16
Fig. 17
*
Steps 8.7 to 8.10 can also be used if you notice your arm is not sitting in the receiving
bracket parallel to the wall and requires adjustment (
Fig 17
).
Tensioning knob
in the unlocked
position
'Figure 8' knot diameter
when tight = 10mm
PVC line
Grommet
Arm tube
Knot (detail Fig 15)
Parallel to wall
10mm tail
8.6
If after trying the method in steps 8.2 to 8.5, your product is still not evenly tensioned
to your satisfaction, you can manually adjust the tension of individual lines.*
8.7
To manually tension a line:
Feed back the particular line through the arm. Make sure tensioning knob is in the
unlocked position (
Fig 14
).
8.8
Loosen the knot securing the line (ensure the grommet doesn't fall out) and pull the
line to your desired tension.
8.9
Ensure knot is tied correctly to stop line pulling through arm when clothes are applied
to the line (
Fig 15
). Re-tie knot to re-secure line (
Fig 16
).
8.10
Repeat manual tensioning method for any other lines that require tension adjustment.
PD4205c Everyday Retracting Product Manual.indd 17
4/11/11 11:25 AM
