manualshive.com logo in svg

Hillrom Compella, Instructions For Use Manual

Share
Download
Hillrom Compella Instructions For Use Manual Download Page 81

Surface Features and Controls

Compella™ Bariatric Bed System Instructions for Use (178951 REV 6)

 67 

1.

At the Pressure Redistribution screen, press 

Patient Transpt

. The 

Do you want to deflate 

for transport?

 screen shows.

2.

Press 

Yes

. The side bolsters and foot section of 

the surface start to deflate, and the 

Deflating 

for Transport

 screen shows.

NOTE:

If you press 

No

, the display returns to the Pressure 

Redistribution screen.

3.

When the side bolsters and foot section are 
deflated, the 

Ready for Transport

 screen 

shows. 

4.

If the surface is deflated for more than 30 
minutes, the alarm sounds. To mute the alarm 
for 10 minutes, press 

Audio Pause

.

To inflate the side bolsters and foot section, press 

Inflate and Exit

. The 

Surface Inflating

 screen 

flashes, the side bolsters and foot section inflate, 
and the unit goes into Pressure Redistribution 
mode in 5 seconds.

C

OMPELLA

™ F

OAM

 S

URFACE

 

WITH

 I

NFLATABLE

 S

IDE

 B

OLSTERS

 

The foam surface with inflatable side bolsters and 
foot section is for patient weights up to 454 kg 
(1000 lb). The width of the foam surface is 
adjustable from 40" to 50" (102 cm to 127 cm). 

Deflate and Inflate the Side Bolsters and Foot Section

Automatically (using the Caregiver Width Adjust controls)

The side bolsters and foot section automatically adjust to the frame width 
and/or length as long as the bed is plugged into AC power and the air supply 
unit is correctly connected to the frame (see “Bed Width Adjustment” on 
page 33).

Retract

Extend

Summary of Contents for Compella





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands