Hill-Rom P2016, Service Manual, Page: 34 / 133

Function Checks
Chapter 2: Troubleshooting Procedures
Page 2 - 4 Bed Locator Service Manual (man138ra)
2
Yes No
↓ →
Go to “Function Checks” on page 2-4.
4. See “Safety Tips” on page 1-15. Perform the “Function Checks” on page
2-4 to ensure proper operation of the Bed Locator.
Function Checks
NOTE:
The following steps address all options available on the Bed Locator. The Bed
Locator being serviced may or may not have all of the options addressed in the
list. If the unit you are servicing does not have the option described in a
particular step, move to the next step.
SHOCK HAZARD:
All function checks must be performed by a qualified service technician.
Failure to observe all electrical precautions detailed in chapter 1 can
result in injury.
1. Initial Actions have been performed.
Yes No
↓ →
Go to “Initial Actions” on page 2-3.
2. An outlet or connector on the Bed Locator does not function properly (i.e.,
loss of power).
Yes No
↓ →
Go to step 4.
NOTE:
If a bed outlet does not function properly, ensure that nothing is obstructing the
Integris Patient Light. See “Electrical Specifications” on page 1-12 for
function information of the bed mains outlet.
3. The equipment typically plugged into the outlet or connector functions
properly in another outlet or connector.
Yes No
↓ →
The equipment may be defective. Refer to equipment’s service
documentation for troubleshooting instructions.
4. The night light illuminates properly.
Yes No
↓ →
Go to RAP 2.2.