Hill-Rom Likorall 200, Service Manual

Page: 28 / 35

3EN200405 Rev. 9 28
www.liko.com
5.89
Contains: Qty:
Electronic card, Processor 1
Fits:
Likorall 240 / 240 R2R
Electronic card LR 240
Kretskort LR 240
Assembly Instruction
Monteringsanvisning
Prod. No. 31290006
3SE640220-01
2011-08-22
NOTE
- ESD protection is required.
- With the emergency stop out, move the liftstrap all the way up against the SSP Limit switch. Check that the
motor does not operate when touching the SSP Limit switch.
- Make sure the spare part is mounted according to the assembly instruction.
- Check all functions related to the changed spare part.
- Repairs and maintenance may only be performed by personnel authorized by Liko/Hill-Rom and using original Liko spare parts.
www.liko.com
© Copyright Liko AB
WWWLIKOCOM
!SSEMBLEY)NSTRUCTIONS%XCHANGE
%LECTRONICCARD,2
!RTNR
,šSGšRGAVLAR 4AGBORTL»SSKRUVFšRHšLJE
$RAAVHšLJETFR»NMOTORPA
KETET $RAURBATTERIER $RAURKRETSKORT
4AGBORTB»DAL»SSKRUVARNA
FšRL»SSKENAN
MM
MM
4OOLSREQUIRED
1. Remove the cover by unfastening the 4 screws. 2. Remove the locking screw from the cover. 3. Remove the two
locking screws from the
locking rail
4. Remove the cover from the Likorall. 5. Remove the battery, 6. Pull the electronic
battery contacts (A) and el. card contact (B) card out.
7. Assemble the Likorall in reverse order.
B
A
3 och 2,5 mm
Tools required:
WWWLIKOCOM
!SSEMBLEY)NSTRUCTIONS%XCHANGE
%LECTRONICCARD,2
!RTNR
,šSGšRGAVLAR 4AGBORTL»SSKRUVFšRHšLJE
$RAAVHšLJETFR»NMOTORPA
KETET $RAURBATTERIER $RAURKRETSKORT
4AGBORTB»DAL»SSKRUVARNA
FšRL»SSKENAN
MM
MM
4OOLSREQUIRED
WWWLIKOCOM
!SSEMBLEY)NSTRUCTIONS%XCHANGE
%LECTRONICCARD,2
!RTNR
,šSGšRGAVLAR 4AGBORTL»SSKRUVFšRHšLJE
$RAAVHšLJETFR»NMOTORPA
KETET $RAURBATTERIER $RAURKRETSKORT
4AGBORTB»DAL»SSKRUVARNA
FšRL»SSKENAN
MM
MM
4OOLSREQUIRED
Connector with 8 pins.
Connector with 10 pins.
200
Likorall™