Fits:
Liko MasterLift 2300* and Likorall 242 S/ES*
*if equipped with Adapter 22 (Prod. No. 3156505).
See applicable assembly instruction.
Care and maintenance
Manufacturer:
Liko AB
SE-975 92 Luleå
Sweden
www.liko.com
©
Copyright Liko
AB 2010-08
After installation, check that the latch locks and runs freely in the
sling bar hook.
For safe and trouble-free operation, a few routine procedures should be performed every day, before the sling bar is in use:
• Check the screw and locking nut that attaches the sling bar
• Check the function of latches and that the latches are intact; missing or damaged latches must always be replaced
• When using a Quick-release Hook system, check that the Quick-release Hook is correctly fastened to the lift and the sling bar
• Before lifting, check that the lifting accessory hangs vertically and can move freely.
When necessary, clean the sling bar with a moist cloth, using warm water or disinfectant.
NOTE! Do not use cleaning agents
that contain phenol or chlorine, since these can damage aluminium and polyamide material.
Service
A periodic inspection of Universal Sling Bars should be carried out at least once a year.
Periodic inspection, repair and maintenance may be performed only in accordance with the Liko service manual by
personnel authorized by Liko and using original Liko spare parts.
Expected Life Time
The product has an expected life time of 10 years when correctly handled, serviced and periodically inspected in accordance
with Liko’s instructions.
Recycling
For instructions on how to recycle your Liko product, please visit our website: www.liko.com.
Product Changes
Liko’s products undergo continuous development, which is why we reserve the right to make product changes without prior
notice. Contact your Liko representative for advice and information about product upgrades.
Design and Quality by Liko in Sweden
Liko is quality certified in accordance with ISO 9001 and its equivalent for the medical device industry, ISO 13485. Liko is also
certified in accordance with environmental standard ISO 14001.
Adapter 22
Assembly with Quick-release Hook to lift
Intended for the following sling bars:
Universal SlingBar 350 QRH, 450 QRH, 600 QRH and Twinbar 670 QRH (Prod. No. 3156084 -
3156087). Universal SlingBar 350 R2R and 450 R2R (Prod. No. 3156094 - 3156095).
Q-link-13
FlexLink
Q-link
Installation of latches
Fits:
Golvo*, Likorall 242 S/ES R2R, Likorall 243 ES*,
Likorall 250 ES* and Multirall.
*if equipped with Q-link (Prod. No. 31590005).
See applicable assembly instruction.
Fits:
Uno 100/102*, Viking* and LikoLight*.
*if equipped with Q-link 13 (Prod. No. 3156509).
See applicable assembly instruction.