Hill-Rom Liko SafetyVest 93 Instructions For Use Manual Download Page 3

3

www.hillrom.com

7EN160146 Rev. 5  •  2020

 

Before lifting, keep the following points in mind:

•   A responsible person within your organization should decide on a case-by-case basis whether one or more caregivers are 

needed.

•  Ensure that the sling selected meets the patient’s needs with reference to model, size, fabric and design.
• For safety and hygiene reasons, use individual slings.
•  Plan the lifting operation so that it can be done as safely and smoothly as possible.
•   Although the Liko sling bars are equipped with latches, special caution must be exercised. Before the patient is lifted from 

the underlying surface, but when the straps are fully extended, make sure the straps are correctly connected to the sling 

bar hooks.

• 

The height to which the lift should proceed varies from person to person

•  Never leave a patient unattended during a lifting situation.
•  Make sure that the wheels on the wheelchair, bed, gurney, etc., are locked during the lifting/transfer operation.
• Always work ergonomically. Use the patient’s ability to actively participate in the operations.

Safety Instructions

Product Changes

Liko’s products undergo continuous development, which is why we reserve the right to make product changes without prior 

notice. Contact your Hill-Rom representative for advice and information about product upgrades.

Design and Quality by Liko in Sweden

Liko is quality certified according to ISO 9001 and its equivalent for the medical device industry ISO 13485.Liko is also certified 

according to environmental standard ISO 14001.

Notice to Users and/or Patients in EU

Any serious incident that has occurred in relation to the device, should be reported to the manufacturer and the competent 

authority of the Member State in which the user and/or patient is established.

  Medical Device Class 

I

 Product

Summary of Contents for Liko SafetyVest 93









Reviews: