7EN160146 Rev. 5
ENGLISH 2020
Liko™ SafetyVest™ Mod. 93
Instructions for Use
Product Description
The Liko SafetyVest is mainly intended for use in combination
with the Sabina™ sit-to-stand lift with a narrow sling bar
(Sabina 350 SlingBar).
In combination with Sabina sit-to-stand lift, the SafetyVest
forms a functional unit. For complete information and best
results, read the instruction for use for both products.
A complete understanding of the contents of these instruction
for use is essential, and the equipment should only be used
by staff who are fully informed.
The Liko SafetyVest is a sit-to-stand vest that is designed to lift
around the back and under the arms. The inside is lined with
a material that is intended to prevent the vest from sliding up
on the body. The waist belt, which is sewn to the vest, helps to
avoid the risk of a patient sliding out of the sit-to-stand vest.
You must use a combination of two loops on each hook when
attaching the sling to the lift.
The Liko SafetyVest is available in several different sizes.
In this document, the person being lifted is referred to as the patient, and the person helping is referred to as the caregiver.
IMPORTANT!
Lifting and transferring a patient always involves a certain level of risk. Read the instructions for use for both the patient
lift and lifting accessories before use. It is important to completely understand the contents of the instructions for use.
The equipment should only be used by trained personnel. Ensure that the lifting accessories are suitable for the lift used.
Exercise care and caution during use. As a caregiver, you are always responsible for the patient’s safety. You must be aware
of the patient’s ability to make it through the lifting situation. If something is unclear, contact the manufacturer or supplier.
