Hill-Rom CarePorter P3000, Service Manual

Page: 96 / 220

4.10 TPM Display Board
Chapter 4: Removal, Replacement, and Adjustment Procedures
CarePorter™ Cart Service Manual (man239) Page 4 - 33
4
5. Remove the two ISS socket adapters (A) from the top cover assembly (B)
(see figure 4-12 on page 4-33).
Figure 4-12. TPM Display Board Removal
6. Carefully lift up the top cover assembly (B) to expose the TPM display
board (C).
7. Carefully disconnect the TPM display cable (D) from the TPM display
board (C).
8. Using the phillips head screwdriver, remove the four screws (E) that secure
the TPM display board (C) to the top cover assembly (B).
Replacement
To install the replacement TPM display board (C), reverse the removal
procedure.
m239_049