Hill-Rom CarePorter P3000, Service Manual

Page: 41 / 220

Function Checks
Chapter 2: Troubleshooting Procedures
Page 2 - 4 CarePorter™ Cart Service Manual (man239)
3. The problem is a result of improper operator action.
Yes No
↓ →
Go to “Function Checks” on page 2-4.
4. Go to “Final Actions” on page 2-5.
Function Checks
1. Initial Actions have been performed.
Yes No
↓ →
Go to “Initial Actions” on page 2-3.
2. Inspect the CarePorter™ Cart for signs of obvious damage. The
CarePorter™ Cart appears to be all right.
Yes No
↓ →
Repair the damage, and proceed to step 3.
3. The powered equipment shelf is operational.
Yes No
↓ →
Go to RAP 2.2.
4. Put the CarePorter™ Cart into the brake position. The brake pedal seats in
position, and both total lock/steer casters do not roll or rotate.
Yes No
↓ →
Go to RAP 2.1.
5. Connect the CarePorter™ Cart to the bed or stretcher by following these
steps:
a. Adjust the power equipment shelf to the designated height for the type
of bed or stretcher to be coupled to, as indicated by the label on the
front panel of the CarePorter™ Cart.
b. Adjust the bed or stretcher to the proper height for coupling to the
CarePorter™ Cart.
c. Push the CarePorter™ Cart and bed or stretcher together. The latches
and pins engage and automatically couple.
Yes No
↓ →
Go to RAP 2.3.
6. Pull each latch release handle. The CarePorter™ Cart separates from the
bed or stretcher.