24
6
–
Replacing burst disc
7 - Fuses
There are two fuses located within the compressor. One in the plug and one next to the power
switch.
The fuse next to the power switch can be removed by taking out the 3-pin plug from the compressor
and using a small screwdriver to open the fuse box. This is the most likely fuse to become blown
during use.
Fuse Specifications
240V Model
–
12.5A 5 x 20mm speed T
110V Model
–
15A 5 x 20mm
Fuses can be ordered through contacting Hill Pumps.
Summary of Contents for 3000-001
