Hill Audio IMA-400 V2, User Manual

Page: 18 / 24

Connections
This unit uses the below connector types, for which the pin assignment must comply with the following
specification. Always make sure to use good connectors and cables to ensure proper operation.
Balanced connections are to be preferred over unbalanced connections where applicable and feasi-
ble. Avoid unbalanced connections exceeding 2m of cable length.
1-conductor shielded cable
(for unbalanced connections)
red
shield
2-conductor shielded cable
(for balanced connections)
red
shield
black
tip
sleeve
tip
sleeve
red = tip
shield = sleeve
red = tip
black = sleeve
shield = uncon.
3
1
2
plug
side
3
1
2
cable
side
red = 2
black = 3
shield = 1
red = 2
shield = 1+3
2
3
1
3
1
2
3
1
2
cable
side
plug
side
red = 2
black = 3
shield = 1
red = 2
shield = 1+3
tip
sleeve
ring tip
sleeve
ring red = tip
shield = ring
red = tip
black = ring
shield = sleeve
tip
sleeve
tip
sleeve
ring
ring
red = tip
shield = ring
red = tip
black = ring
shield = sleeve
tip
sleeve
tip
sleeve
red = tip
shield = sleeve
red = tip
black = sleeve
shield = uncon.
XLR male
XLR female
6.35mm TRS-stereo
6.35mm TRS-mono
3.5mm TRS-stereo
RCA
CABLE Types
Structure
Balanced
connection
Unbalanced
connection
Terminal Plug
red = 1
black = 2
USER MANUAL - IMA400V2 INSTALLATION MIXING AMPLIFIER
PAGE 17