Assembly Steps:
Step 1:
Place Slate Top (E) upside down on a protected flat surface. Then
attach one Corner Posts with Side Panel (F) to Slate Top (E) by using
M6x12
Bolt (J) screw.
Hand tighten bolts
,
But do
not
fully tighten.
Repeat for
another Corner Posts with Side Panel (F) .
(See FIG 1)
Step 2:
Attach one Side Panel (G) between two Corner Posts with Side Panel
(F)
by using 4
M6 x18
Bolts (K) and Nuts (L).
Hand tighten bolts,But do not fully
tighten
. Repeat
for another Side Panel (G).
(See FIG 2)
Step 3:
Check alignment and make
any
necessary
adjustments.
Tighten all bolts
with screw driver.
Step 4:
Assemble the Screen (B) by using Lift Handle (A) and
M6
Nut (L).
(See FIG 3)
Step 5:
Turn the assem
bled
table top to upright position, put Fire Bowl (D) onto the
Slate Top (E) and place Log Grate(C) into Fire Bowl (D).
(See FIG 4)
,
Finally put
the screen (B) on the fire bowl.
(See FIG 5),
Your fire pit is ready for use now.
Once fire pit has cooled after use ,use
cover to protect against rain and dust .
Page
5
of
6
