Wiegand Camera
·
Operation Manual
12
Steps:
1.
Go to
Configuration
->
System
->
Security->Security Service
to enable SSH.
Figure 4-1
SSH Enable Interface
2.
Access device via SecureCRT software, enter device debug mode, input the print
information that we need:
setDebug -l 7 -d 111 -m ROAD_TRAFFIC
setDebug -l 7 -d 111 -m IPC
For more details please refer to
How to enable SSH and collect the print information
The URL path is as follows:
3.
Check device SSH log information.
Figure 4-2
Log information