UM DS-2CE16D0T-WL3 061818NA
2018 Hikvision USA Inc.
•
Make sure that the device is firmly fixed if wall mounting or ceiling mounting is
adopted.
•
If smoke, odor, or noise rise from the device, turn off the power at once and
unplug the power cord, and then contact the service center.
•
Never attempt to disassemble the camera by unprofessional personal.
Cautions
•
Do not drop the camera or subject it to physical shock.
•
Do not touch sensor modules with fingers.
•
If cleaning is necessary, use a clean cloth with a bit of ethanol, and wipe it gently.
•
Do not aim the camera at the sun or extra bright places.
•
The sensor may be burned out by a laser beam, so if any laser equipment is in
use, make sure that the sensor surface is not exposed to the laser beam.
•
Do not expose the device to high electromagnetic radiation or extremely hot,
cold, dusty, or damp environments.
•
To avoid heat accumulation, good ventilation is required for the operating
environment.
•
Keep the camera away from liquid while in use for a non-waterproof device.
•
While in delivery, the camera shall be packed in its original packing or packing of
the same texture.