Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement ceiling, expansion bolts are required to
fix the camera. For wooden ceiling, self-tapping
screws are required.
5.
Route the cables through the cable hole, or the side
opening.
6.
Connect the corresponding cables, such as power
cord, and video cable.
7.
Power on the camera to check whether the image on
the monitor is gotten from the optimum angle. If not,
adjust the camera according to the figure below to get
an optimum angle.
Pan Position
0° to 355°
Rotation Position
0° to 355°
Tilt Position
0° to 60°
Figure 2-4
3-Axis Adjustment
8.
Fit the black liner back to the camera.
Figure 2-5
Fit the Black Liner Back
9.
Tighten the screws on the bubble of the dome camera
to finish the installation.
Figure 2-6
Tighten the Bubble
2.2
Wall Mounting
Before you start:
You need to purchase a wall mount first.
Steps:
1.
Drill four screw holes in the wall according to the
holes of the mount.